Downloads read more ...
Brochure Friction Stabilizer,
Filesize:1.0 MB
Filesize:1.0 MB
Brochure DSI Groundsupport,
Filesize:10.1 MB
Filesize:10.1 MB
Friction Stabilizers
Nominal Sizes 33mm, 39mm and 46mm
| Dimenions | FS-33 | FS-39 | FS-46 |
| Taper Diameter A | 1-1/8” (28 mm) | 1-3/16” (30 mm) | 1-1/2” (38 mm) |
| Taper Length B | 2-3/8” (60 mm) | 2-1/2” (65 mm) | 2-1/2” (65 mm) |
| Slot Width C | 1/2” (13 mm) | 5/8” (16 mm) | 7/8” (22 mm) |
| Steel Thickness D | 3/32” (2.5 mm) | 3/32” (2.5 mm) | 1/8” (3 mm) |
| Bolt Size E | 1-5/16” (33 mm) | 1-1/2” (39 mm) | 1-13/16” (46 mm) |
All dimensions nominal
| Technical Data | FS-33 | FS-39 | FS-46 |
| Recommended Nominal Bit Size | 1-3/16” to 1-5/16” (31 to 33 mm) | 1-3/8” to 1-1/2” (35 to 38 mm) | 1-11/16” to 1-3/4” (43 to 45 mm) |
| Available Tube Lengths | 3’ to 8’ (0.9 to 2.4 m) | 3’ to 10’ (0.9 to 3.0 m) | 3’ to 12’ (0.9 to 3.7 m) |
| Typical Breaking Capacity | 24,000 lbs (107 kN) | 28,000 lbs (124 kN) | 40,000 lbs (178 kN) |
| Minimum Breaking Capacity | 16,000 lbs (71 kN) | 20,000 lbs (89 kN) | 30,000 lbs (133 kN) |
| Recommended Initial Anchorage | 3 to 6 tons (27 to 53 kN) | 3 to 6 tons (27 to 53 kN) | 6 to 10 tons (53 to 89 kN) |
| Ultimate Axial Strain | Typical 16% | ||
18” & 24” (0.46 m & 0.61 m) utility hangers also available - not intended for ground supportAlso available hot dip galvanized to ASTM A123, CSA G164 specifications